Reinforcement of Reinforcement

Reinforcement of Reinforcement

Features
Reinforcing steel exposed repair method that is the use of rust conversion agent material to do the first anti-rust treatment to form a protective film, the steel and the outside of the air and water isolation, do not let it continue to rust, and then to light resin mortar repair. This repair material has good adhesion, durability and high strength, etc., can peel off parts to restore the original protective layer of the role, to achieve the purpose of repair.

Use
● Suitable for stone and concrete coated steel exposed.
● For vertical, inverted surface difficult construction.
● For concrete slabs, beams, columns weaken the damaged parts of the repair.
● For the ceiling upside down reinforcement.
● Used for carbon fiber reinforced concrete construction before repair.

Example:

---

SP502 lightweight epoxy resin mortar
Product description
502AB is a lightweight hollow ceramic sand as a bone, mixed with the resin developed from the lightweight sand epoxy resin, dedicated to the building floor reinforced concrete wall, carbon fiber attached to the former level of repair.

Characteristics
(1) Light weight, pour surface can be thick coating, does not occur sagging.
(2) Construction is simple, can improve work efficiency.
(3) Weatherability plus, excellent strength.

Use methods and precautions
	(1)	Concrete surface must first clear the cement hardening layer, floating slurry, grease and other pollutants.
	(2)	Then use the primer before you can achieve the next effect.
	(3)	First A and B dose ratio prepared.
	(4)	Take an empty bucket into the A agent, with an electric stirrer while stirring into the light sand (EPOXY resin with light sand is about 1: 1.5), until about the paste, and then add B agent ( Hardening agent) while adding light sand, while the sand while stirring into a vertical flow, you can apply to the ceiling upside down.
	(5)	In the product mixing process, you can add the right amount of M5 anti-powder, you can stir more easily, can reduce the amount of light sand used, and effectively prevent the resin due to weight reasons, the occurrence of vertical flow of the situation.
	(6)	For safety and health considerations, please wear rubber gloves construction.
※	(7)	The speed of hardening is controlled by the atmospheric temperature, absolutely can not increase or reduce the amount of hardener mixture to control the hardening speed, change A agent and B mixture ratio will cause hardening, reduce the physical properties of the glue.
	(8)	If you accidentally touch the hands or skin, please use a toluene cloth to wipe, and then wash with soap and water.
	(9)	The amount of this product 1M ² 1cm thickness, about 12kg, 4kg resin plus 8kg light sand.

---

---

Photo and description:

01-Concrete flaking and fire repair - Reinforcement rust		02-Concrete flaking and fire repair - Reinforcement rust		03-Concrete flaking and fire repair - Reinforcement rust
04-Concrete peeling and fire repair - Reinforcement rust (zinc paint) operation		05-Concrete flaking and fire repair - Reinforcement rust (zinc paint) operation		06-Concrete flaking and fire repair - Reinforcement rust (zinc paint) operation
07-Concrete flaking and fire repair - Reinforcement rust (zinc paint) to complete		08-Concrete flaking and fire repair - Reinforcement rust (zinc paint) to complete		09-Concrete flaking and fire repair - Reinforcement rust (zinc paint) to complete
10-Concrete flaking and fire repair - New and old interface agent		11-Concrete flaking and fire repair - New and old interface agent		12-Concrete flaking and fire repair - EPOXY lightweight mortar
13-Concrete flaking and fire repair - EPOXY lightweight mortar		14-Concrete flaking and fire repair - EPOXY lightweight mortar		15- Concrete flaking and fire repair - EPOXY lightweight mortar
16-Concrete flaking and fire repair - EPOXY lightweight mortar		17-Concrete flaking and fire repair - EPOXY lightweight mortar		18-Concrete flaking and fire repair - EPOXY lightweight mortar is completed