Features
Inorganic water-based concrete strengthening agent molecular structure is very small, can penetrate into the interior of concrete, due to prevent water penetration, to inhibit the expansion of rust and rust.
The concrete treated with the inorganic water concrete reinforcing agent can prevent the weathering and pulverization from occurring due to the non-migration of the alkaline free water, and the neutralizing deterioration can be prevented.
Construction steps
1. Ready for work
● The surface of the topcoat shall be cleaned prior to application, and all grease, dirt, loosening and other debris shall be removed.
● Any situation where the site is affected by the construction shall be surveyed and the spraying work shall be initiated only after the approval of the Works Division under the conditions of the site.
2. Site construction
● The contractor shall apply the material of the cement paint to the original packaging of the original, and shall not be doping with other materials (mineral sealant, etc.) during construction. The dilution shall not be greater than [20%], so as to avoid affecting the quality of the sprayed material.
● Before the construction will not need to spray the part, to be covered to prevent the construction of pollution.
● Can be used without air spraying machine to one or more channels, drum construction should be [2] operation, but to meet the standard film thickness of the standard.
● Spraying surface should be even smooth, no bubbles, flow marks and high and low inequality.
● The surface of the new construction should be warned and maintained when not completely dry.